Papers


Yasso, S., Darwin, D., and O’Reilly, M. O., “Effects of Concrete Tail Cover and Tail Kickout on Anchorage Strength of 90-Degree Hooks,” ACI Structural Journal, Vol. 118, No. 6, Nov. 2021, pp. 227-236 DOI: 10.14359/51732990. Download pdf  KU ScholarWorks

Lee, H.-J., Lin, J.-X., Lequesne, R. D., Lepage, A., and Wang, J.-C., "Experimental Study on Minimum Depth of Interior Joints for Special Moment Frames with High-Strength Reinforcement and Concrete," Proceedings of The 21st Japan-Korea-Taiwan Joint Seminar on Earthquake Engineering for Building Structures (SEEBUS 2019), Hsinchu, Taiwan, December 6-7, 2019.  KU ScholarWorks

Darwin, D., Khajehdehi, R., Feng, M., Lafikes, J., Ibrahim, E., and O’Reilly, M., “Low-Cracking High-Performance Concrete (LC-HPC) for Durable Bridge Decks,” Cracking and Durability in Sustainable Concretes, American Concrete Institute Symposium Vol., SP-336, R. Leistikow and K. W. Kramer, ed., 2019, pp. 101-116.  KU ScholarWorks

Lafikes, J., Khajehdehi, R., Feng, M., O’Reilly, M., and, Darwin, D., “Internal Curing and Supplementary Cementitious Materials in Bridge Decks,” Cracking and Durability in Sustainable Concretes, American Concrete Institute Symposium Vol., SP-336, R. Leistikow and K. W. Kramer, ed., 2019, pp. 1-20.  KU ScholarWorks

Ghimire, K. P., Shao, Y., Darwin, D., and O’Reilly, M., “Conventional and High-Strength Headed Bars – Part 2: Data Analysis,” ACI Structural Journal, Vol. 116, No. 4, May 2019, pp. 265-272.  KU ScholarWorks

Ghimire, K. P., Shao, Y., Darwin, D., and O’Reilly, M., “Conventional and High-Strength Headed Bars – Part 1: Anchorage Tests,” ACI Structural Journal, Vol. 116, No. 4, May 2019, pp. 255-264.   KU ScholarWorks

Ajaam, A., Yasso, S., Darwin, D., O’Reilly, M., and Sperry, J., “Anchorage Strength of Closely-Spaced Hooked Bars,” ACI Structural Journal, Vol. 115, No. 4, July-Aug. 2018, pp. 1143-1152. KU ScholarWorks

O’Reilly, M., Farshadfar, O, and Darwin, D., “Effect of Supplementary Cementitious Materials on Chloride Threshold and Corrosion Rate of Reinforcement,” ACI Materials Journal, Vol. 116, No. 1, Jan. 2019, pp. 125-133. KU ScholarWorks

O’Reilly, M., Farshadfar, O., Darwin, D., Browning, J., and Locke, C., “Corrosion-Induced Concrete Cracking for Uncoated and Galvanized Reinforcing Bars,” ACI Materials Journal, Vol. 115, No. 6, Nov. 2018, pp. 825-832. KU ScholarWorks

Pendergrass, B., Darwin, D., Khajehdehi, R., and Feng, M., “Effects of Internal Curing, Slag and Silica Fume on Concrete Shrinkage,” ACI Materials Journal, Vol. 115, No. 4, July 2018, pp. 585-593.  KU ScholarWorks

Sperry, J., Darwin, D., O’Reilly, M., Lepage, A., Lequesne, R., Matamoros, A., Feldman, L., Yasso, S., Searle, N., DeRubeis, M., and Ajaam, A., “Conventional and High-Strength Hooked Bars: Detailing Effects,” ACI Structural Journal, Vol. 115, No. 1, Jan.-Feb. 2018, 247-257.  KU ScholarWorks

O’Reilly, M., Sperry, J., Darwin, D., Lafikes, J., Somogie, I., Storm, S., and Browning, J., “Corrosion Performance of Poorly Pickled Stainless Steel Reinforcement,” ACI Materials Journal, Vol. 114, No. 6, Nov.-Dec. 2017, pp. 839-845.KU ScholarWorks

Pendergrass, B., Darwin, D., Feng, M., and Khajehdehi, R., “Compatibility of Shrinkage-Reducing and Air-Entraining Admixtures,” ACI Materials Journal, Vol. 114, No. 5, Sep.-Oct. 2017, pp. 809-818.  KU ScholarWorks

Parra-Montesinos, G. J., Wight, J. K., Kopczynski, C., Lequesne, R. D., Setkit, M., Conforti, A., and Ferzli, J. "Elimination of Diagonal Reinforcement in Earthquake-Resistant Coupling Beams through Use of Fiber-Reinforced Concrete.” SP-313: Proceedings of the First ACI and JCI Joint Seminar: Design of Concrete Structures Against Earthquake and Tsunami Disasters, Special Publication ​of the American Concrete Institute, Farmington Hills, MI., 2017, pp 8.  KU ScholarWorks

Parra-Montesinos, G. J., Wight, J. K., Kopczynski, C., Lequesne, R. D., Setkit, M., Conforti, A., and Ferzli, J. (2017). “Earthquake-Resistant Fiber Reinforced Concrete Coupling Beams Without Diagonal Bars.” SP-310: Fibre-Reinforced Concrete: From Design to Structural Applications FRC 2014: ACI-fib International Workshop, Special Publication ​of the American Concrete Institute, Farmington Hills, MI., 2017, pp 10.  KU ScholarWorks

Sperry, J.,  Darwin, D., O'Reilly, M., Lequesne, R.D.,Yasso, S.,  Matamoros, A., Feldman, L.R.,and Lepage, A., "Conventional and High-Strength Hooked Bars - Part 2: Data Analysis," ACI Structural Journal, Vol. 114, No. 1, January-February 2017, pp. 267-314.  KU ScholarWorks

Sperry, J., Yasso, S., Searle, N., DeRubies, M., Darwin, D., O'Reilly, M., Matamoros, A., Feldman, L.R., Lepage, A., Lequesne, R.D., and Ajaam, A., "Conventional and High-Strength Hooked Bars - Part 1: Anchorage Tests," ACI Structural Journal, Vol. 114, No. 1, January-February 2017, pp. 255-342. KU ScholarWorks

Cheng, M.-Y., Hung, S.-C., Lequesne, R. D., and Lepage, A., "Earthquake-Resistant Squat Walls Reinforced with High-Strength Steel," ACI Structural Journal, 113(5),  2016, pp.1065-1076.  KU ScholarWorks

Cheng, M.-Y., Wibowo, L. S.B., Lequesne, R. D., Lepage, A., and Giduquio, M. B., "Deformation Capacity and Strength of RC Frame Members with High-Strength Materials," SP-311: James K. Wight: A Tribute from his Students and Colleagues. Farmington Hills, MI: American Concrete Institute, 2016, pp 15. KU ScholarWorks

Lequesne, R. D., and Parra-Montesinos, G. J. , "A Review of Research on Shear Strength Decay in Members under Load Reversals,"  SP-311: James K. Wight: A Tribute from his Students and Colleagues. Farmington Hills, MI: American Concrete Institute. 2016 pp. 15. KU ScholarWorks

Lequesne, R. D., Parra-Montesinos, G. J., and Wight, J. K., "Seismic Response of Fiber-Reinforced Concrete Coupled Walls," ACI Structural Journal, 113(3), 2016, pp. 435-445. KU ScholarWorks

Yuan, J., O'Reilly, M., Matamoros, A., and Darwin, D., "Effect of Preexisting Cracks on Lap Splice Strength of Reinforcing Bars," ACI Structural Journal, Vol. 113, No. 1, July-August 2016, pp. 901-812. KU ScholarWorks

Paulson, C., Rautenberg, J., Graham, S., Darwin, D., "Defining Yield Strength for Nonprestressed Reinforcing Steel," ACI Structural Journal, Vol. 113, No. 1, January-February 2016, pp. 169-178. KU ScholarWorks

Matzke, E. M., Lequesne, R. D., Parra-Montesinos, G. J., and Shield, C. K., "Behavior of Biaxially Loaded Slab-Column Connections with Shear Stud," ACI Structural Journal, 112(3), 2015 pp. 335-346. KU ScholarWorks

Yuan, J., Lindquist, W., Darwin, D., Browning., "Effect of Slag Cement on Drying Shrinkage of Concrete," ACI Materials Journal, Vol. 112, No. 2, March-April 2015, pp. 267-276. KU ScholarWorks

Lequesne, R. D., and Pincheira, J. A., "Proposed Revisions to the Strength-Reduction Factor for Axially Loaded Members," Concrete International, 36(9), 2015, pp. 43-49.  KU ScholarWorks

Darwin, D., O’Reilly, M., Browning, J., and Xing, L., “Case for Changing Reinforcing Bar Deformation Spacing Requirements,” Journal of Testing and Evaluation, ASTM, Vol. 42, No. 2, Mar. 2014, pp. 368-374.  KU ScholarWorks

Lequesne, R. D., Parra-Montesinos, G. J., and Wight, J. K., "Seismic Behavior and Detailing of High-Performance Fiber-Reinforced Concrete Coupling Beams and Coupled Wall Systems," ASCE Journal of Structural Engineering, 139, 2013, pp. 1362–1370. KU ScholarWorks

O'Reilly, M., Darwin, D., Browning, J., Xing, L., Locke Jr., C.E., and Virmani, P., "Effect of Corrosion Inhibitors on Concrete Pore Solution Composition and Corrosion Resistance," ACI Materials Journal, Vol. 110, No. 5, September-October 2013, pp. 577-585. KU ScholarWorks

Guo, G., Joseph, L.M., and Darwin, D., "Effects of Story-by-Story Post-Tensioning on Multi-Story Buildings," ACI Structural Journal, Vol. 110, No. 4, July-August 2013, pp. 649-657. KU ScholarWorks

Bai, Y., Huan, J., and Kim, S., "Measuring Bridge Construction Efficiency Using the Wireless Real-Time Video Monitoring System," Journal of Management in Engineering, ASCE, Vol. 28, No. 2, April 2012, pp. 120-126. KU ScholarWorks

Browning, J., Darwin, D., Reynolds, D., and Pendergrass, B., “Lightweight Aggregate as Internal Curing Agent to Limit Concrete Shrinkage,” ACI Materials Journal, Vol. 108, No. 6, Nov.-Dec. 2011, pp. 638-644. KU ScholarWorks

Kim, S., Bai, Y., Jung, Y-K., and Yun, D., "Highway Construction Productivity Measurement with a Wireless Real-time Productivity Measurement System," Journal of the Transportation Research Board, No. 2228, Transportation Research Board of the National Academies, Washington, D.C., 2011, pp. 26-33. KU ScholarWorks

Alemdar, F., Matamoros, A., Bennett, C., Barrett-Gonzalez, R., and Rolfe, S. (2011). "Improved Method for Bonding CFRP Overlays to Steel for Fatigue Repair," Proceedings of the ASCE/SEI Structures Congress, Las Vegas, NV, April 14-16, 2011.

Cheng, F. F., Wang, Y. W., Ling, X. Z., and Bai, Y., “A Petri Net Simulation Model for Virtual Construction of Earthmoving Operations,” Automation in Construction, Elsevier, Vol. 20, No. 2, March 2011, pp. 181-188. KU ScholarWorks

Bai, Y. and Li, Y., “Determining the drivers' acceptance of EFTCD in highway work zones,” Accident Analysis and Prevention, Elsevier, Vol. 43, No. 3, May 2011, pp. 762-768. KU ScholarWorks

Darwin, D., Browning, J.P., Lindquist, W., McLeod, H.A.K., Yuan, J., Toledo, M., and Reynolds, D., "Low-Cracking, High-Performance Concrete Bridge Decks - Case Studies over First 6 Years," Transportation Research Record, No. 2202, December 2010, pp. 61-69. KU ScholarWorks.

Chui, K. W. and Bai, Y., "Comparison of Contract General Conditions between United States and China," Journal of Architectural Engineering, ASCE, Vol. 16, No. 4, November 2010, pp. 119-125. KU ScholarWorks

Bai, Y., Finger, K., and Li, Y., “Analyzing Motorist’s Responses to Temporary Signage in Highway Work Zones,” Safety Science, Elsevier, Vol. 48, No. 2, February 2010, pp. 215-221. KU ScholarWorks

Li, Y. and Bai, Y., "Highway Work Zone Risk Factors and their Impact on Crash Severity," Journal of Transportation Engineering, ASCE, Vol. 135, No. 10, October 2009, pp. 694-701. KU ScholarWorks

Seliem, H. M., Hosny, A., Rizkalla, S., Zia, P., Briggs, M., Miller, S., Darwin, D., Browning, J., Glass, G. M., Hoyt, K., Donnelly, K., and Jirsa, J. O., “Bond Characteristics of High-Strength ASTM A1035 Steel Reinforcing Bars,” ACI Structural Journal, Vol. 106, No. 4, July-Aug. 2009, pp. 530-539. KU ScholarWorks

Darwin, D., Browning, J.P., O’Reilly, M., Xing, L. and Ji, J., "Critical Chloride Corrosion Threshold of Galvanized Reinforcing Bars," ACI Materials Journal Vol. 106, No. 2, March/April 2009, pp. 176-183.  KU ScholarWorks

Li, Y. and Bai, Y. “Effectiveness of Temporary Traffic Control Measures in Highway Work Zones,” Safety Science, Elsevier, Vol. 47, No. 3, pp. 453-458, March 2009. KU ScholarWorks

Darwin, D., Browning, J.P., Gong, L., and Hughes, S.R., "Effects of Deicers on Concrete Deterioration," ACI Materials Journal Vol. 105, No. 6, November/December 2008, pp. 622-627. KU ScholarWorks

Li, Y. and Bai, Y. "Development of crash-severity-index models for the measurement of work zone risk levels," Accident Analysis and Prevention, Vol. 40, No. 5, pp. 1724-1731, Elsevier, September 2008. KU ScholarWorks

Li, Y. and Bai, Y. "Comparison of Characteristics between Fatal and Injury Accidents in the Highway Construction Zones," Safety Science, Vol. 46, No. 4, pp. 646-660, Elsevier, May 2008.  KU ScholarWorks

Young, C. B., and Brunsell,N. A., "Missouri River Basin: An Analysis using Daily Raingage Data, Journal of Hydrologic Engineering, in press (2007).

Medina, M. A., and Young, C. B., “Evaluating the Sensitivity of Attic Radiant Barrier Performance to Climate Parameters,”  Journal of Energy Engineering, in press (2007).

Brunsell, N. A. and Young,  C.B. “Land Surface Response to Precipitation Events using MODIS and NEXRAD Data,” International Journal of Remote Sensing, in press (2007).

Kim, I.-J., Hutchinson, S. L., Young, C. B., and Hutchinson, J. M. S.,   “Riparian Ecosystem Management Model (REMM):  Sensitivity to Soil, Vegetation, and Weather Input Parameters,” Journal of the American Water Resources Association, in press (2007).

Darwin, D., Lindquist, W. D., McLeod, H. A. K., and Browning, J., “Mineral Admixtures, Curing, and Concrete Shrinkage – An Update,” Concrete Technology, Taiwan Concrete Institute, Vol. 1, No. 1, October 2007, pp. 56-65. Also, Proceedings of the TCI 2007 Concrete Technology Conference and Exhibition, November 2-3, 2007, pp. 25-36. KU ScholarWorks

Bai. Y. and Kim, S. H. "Processes and Techniques for Rapid Bridge Replacement after Extreme Events." Journal of the Transportation Research Board, No. 1991, Transportation Research Board of the National Academies, Washington, D.C., 2007, pp. 54-6. KU ScholarWorks

Bai, Y., Kim, S.H., and Burkett, W. R., "Enhancing the Capability of Rapid Bridge Replacement after Extreme Events," Engineering, Construction and Architectural Management, Vol. 14, No. 4, pp. 375-386, Emerald Group Publishing Limited, August 2007. KU ScholarWorks

Bai, Y. "Intelligent Painting Process Planner for Robotic Bridge Painting," Journal of Construction Engineering and Management, ASCE, Vol. 133, No. 4, 2007 Page 335-342. KU ScholarWorks

Parsons, R.L., Young, C.B., and Kneebone, E.R., "Structuring a Comprehensive Georeferenced Subgrade Database," Pavement Mechanics and Performance. ASCE Geotechnical Special Publication 154. ASCE, Reston, Virginia. 173-179, 2006.

Parsons, R.L., Young, C.B., and Kneebone, E.R., "Storage and Analysis of Georeferenced Geotechnical and Pavements Data,” Geotechnical Engineering in the Information Technology Age, edited by DeGroot et al., ASCE, Reston, Virginia, 2006.

Lindquist, W.D., Darwin, D., Browning, J.P., and Miller, G.G., "Effect of Cracking on Chloride Content in Concrete Bridge Decks," ACI Materials Journal, Vol. 103, No. 6, November-December 2006, pp. 467-473. KU ScholarWorks

Bai, Y. and Burkett, W.R., "Rapid Bridge Replacement: Processes, Techniques, and Needs for Improvements," Journal of Construction Engineering and Management, ASCE, 132, No. 11, November 2006, Page 1139-1147. KU ScholarWorks

Bai, Y., Burkett, W.R. and Nash, P.T., "Rapid Bridge Replacement under Emergency Situation: Case Study," Journal of Bridge Engineering, ASCE, Vol. 11, No. 3, May 2006, Page 266-273. KU ScholarWorks

Bai, Y., Burkett, W.R. and Nash, P.T., "Lessons Learned from an Emergency Bridge Replacement Project," Journal of Construction Engineering and Management, ASCE, Vol. 132, No. 4, April 2006, Page 338-344. KU ScholarWorks

Darwin, D. and Detwiler, R.J., "How to Prepare a Good Technical Presentation," Concrete International, February 2006, pp. 53-56.  KU ScholarWorks

Young, C. B. and McEnroe, B.M., “Updated Precipitation Frequency Estimates for Kansas City: A Comparison with TP-40 and Hydro-35,” Journal of Hydrologic Engineering,11(3), p. 206-213, 2006.

Medina, M. A., Young, C. B., “A Perspective on the Effect of Climate and Local Environmental Variables on the Performance of Attic Radiant Barriers in the United States,” Building and the Environment 41, p. 1767-1778, 2006.

Ebihara, T.,Young, C. B., Tiwari, V., and Agee, L. M. , "Field Evaluation of Vegetated Highway Embankments for the Retention of PAH, Metals, and Particulates in Stormwater Runoff," Proceedings of the Water Environment Federation 78th Annual Technical Exhibition and Conference. Washington, D.C., 2005.

Darwin, D., Lutz, L.A., and Zuo, J., "Recommended Provisions and Commentary on Development and Lap Splice Lengths for Deformed Reinforcing Bars in Tension," ACI Structural Journal V. 102, No. 6, November-December, 2005, pp 892-900. KU ScholarWorks

Zhang, M., Medina, M.A., and King, J.B., “Development of a Thermally Enhanced Frame Wall With Phase-change Materials for On-peak Air Conditioning Demand Reduction and Energy Savings in Residential Buildings,” International Journal of Energy Research. Vol. 29, 2005, ppp. 795-809.

Darwin, D., Browning, J.P., and Lindquist, W.D., "Control of Cracking in Bridge Decks: Observations from the Field," Cement, Concrete and Aggregates, ASTM International, Vol. 26, No. 2, Dec. 2004, pp. 148-154. KU ScholarWorks

Kucera, P. A., Krajewski, W.F., and Young, C. B., “Radar Beam Occultation Studies using GIS and DEM Technology: An Example Study of Guam,” Journal of Atmospheric and Oceanic Technology, 21(7), 2004, pp. 995–1006.

Parsons, R.L, Milburn, J.P. “Engineering Performance of Stabilized Soils”. Geomaterials, Transportation Research Record No 1837. Journal of the Transportation Research Board. National Research Council. Washington D.C. 2004, pp. 20-29.

Darwin, D. and Carino, N.J., "Rapid Development of ACI Documents," Concrete International, Vol. 26, No. 11, Nov. 2004, pp. 50-51.  KU ScholarWorks

Bai, Y. and Pigott, R., “Assessing Outcomes Using Program Assessment Portfolio Approach,” Journal of Professional Issues in Engineering Education and Practice, ASCE, Vol. 130, No. 4, October 2004, Page 246-254.  KU ScholarWorks

Brachmann, I., Browning, J.P., Matamoros, A., “Drift–Dependent Confinement Requirements for Reinforced Concrete Columns Under Cyclic Loading,” ACI Structural Journal, Vol. 101, No.5, September-October 2004, pp. 669-677.

Hernandez, M., Medina, M.A., and Schruben, D.L., , “Verification of an Energy Balance Approach to Estimate Indoor Wall Heat Fluxes Using Transfer Functions and Simplified Solar Heat Gain Calculations,” Mathematical and Computer Modelling, Vol. 37, 2003, pp. 235-243.

Matamoros, A., Garcia, L.E., Browning, J., and Lepage, A., “Flat-Rate Design Method for Low and Medium-Rise Reinforced Concrete Structures,” ACI Structural Journal, Vol. 101, No. 4, July-August 2004, pp. 435-446.

Matamoros, A., Browning, J.P., and Luft, M., “Evaluation of Simple Methods for Estimating Drift of Reinforced Concrete Buildings Subjected to Earthquakes,” Earthquake Spectra, The Professional Journal of the Earthquake Engineering Research Institute, Vol. 19 I4, November 2003, pp. 839-861.

Matamoros, A., Kuok-Hong, “Design of Simply-Supported Deep Beams using Strut-and-Tie Models,” ACI Structural Journal, VOL. 100, No. 6, November-December 2003. pp. 704-712.

Miller, G.G., Kepler, J.L., and Darwin, D., "Effect of Epoxy Coating Thickness on Bond Strength of Reinforcing Bars," ACI Structural Journal, V100, No. 3, May-June 2003, pp. 1-7. KU ScholarWorks

Matamoros A. and Sozen, M., “Drift Limits of High-Strength Concrete Columns Subjected to Load Reversals,” Journal of Structural Engineering, ASCE, VOL. 129, No. 3, March 2003, pp. 297-313.

Kuntz, G., and Browning, J.P., “Reduction of Column Yielding during Earthquakes for RC Frames,” ACI Structural Journal, Vol. 100, No. 5, Sept.-Oct. 2003, pp. 573 – 580. KU ScholarWorks

Miller, G. G., Kepler, J. L., and Darwin, D., "Effect of Epoxy Coating Thickness on Bond Strength of Reinforcing Bars," ACI Structural Journal, Vol. 100, No. 3, May-June, 2003, pp. 314-320. KU ScholarWorks

Young, C. B., and McEnroe, B. M., “Sampling Adjustment Factors for Rainfall Recorded at Fixed Time Intervals,” Journal of Hydrologic Engineering, 8(5),2993, pp. 294-296.

Matamoros, A., and Ramirez, J., “Example 6: Prestressed Beam,” Examples for the Design of Structural Concrete with Strut-and-Tie Models, SP-208, American Concrete Institute, Farmington Hills, MI, 2002, pp. 163-184.

Aguilar, G., Matamoros, A., Parra-Montesinos, G., Ramirez, J., and Wight, J., “Experimental Evaluation of Design Procedures for Shear Strength of Deep Reinforced Concrete Beams,” ACI Structural Journal, Vol. 99, No. 4, July-August 2002, pp. 539-548.

Browning, J.P., “Proportioning Earthquake-Resistant RC Frames in Central/Eastern U.S.,” Earthquake Engineering and Structural Dynamics, Vol. 31, 2002, pp. 1267-1280.

Darwin, D., McCabe, S. L., Browning, J.P., Matamoros, A., and Zuo. J., "Evaluation of Development Length Design Expressions," Proceedings: Bond in Concrete - From Research to Standards, eds. G. L. Balázs, P. J. M. Bartos, J. Cairns, A. Borosnyói, Budapest, 2002, pp. 747-754.

Darwin, D., Zuo, J., and McCabe, S.L. "Descriptive Equations for Development and Splice Strength of Straight Reinforcing Bars," Proceedings: Bond in Concrete - From Research to Standards, eds. G. L. Balázs, P. J. M. Bartos, J. Cairns, A. Borosnyói, Budapest, 2002, pp. 501-508.

Darwin, D., Browning, J. P., Balma, J., Ji, J., Gong, L., Nguyen, T. V., and Locke, C. E., "Corrosion-Resistant Reinforcing Steels," Proceedings, National Bridge Conference, Nashville, 2002, 17 pp.

Kirsch, F.W. and Medina, M.A., “Cost of Implementation of Energy-Efficiency Measures in Specific Industries,” The Journal of Energy and Development, Vol. 27, No. 2, 2002, pp. 285-298.

Parsons, R.L. and Frost, J.D., “Evaluating Site Investigation Quality Using GIS And Geostatistics,” Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol. 128, No. 6, 2002, pp. 451-461.

Cross, S.A. and Parsons, R.L., “Evaluation of Expenditures on Kansas Rural Interstate Pavements,” Proceedings of the 81st Annual Meeting, Transportation Research Board, National Research Council, Washington D.C., January 7-11, 2002, CD-ROM. 22 pp.

Bradley, A.A., Peters-Lidard, C.D. , Nelson, B.R., Smith, J.A., and Young, C.B., “Raingage Network Design using NEXRAD Precipitation Estimates,” Journal of the American Water Resources Association, 38(5), 2002, p. 1393-1407.

Deaton, S.L., Frost, J.D., Luna, R., and Parsons, R.L. “GIS-Based Evaluation of Geotechnical Borehole Log Quality,” Geology and Properties of Earth Materials, Transportation Research Record No 1755. Journal of the Transportation Research Board. National Research Council, Washington D.C., 2001, pp. 15-25.

Darwin, D., Barham, S., Kozul, R., and Luan, S., "Fracture Energy of High-Strength Concrete," ACI Materials Journal, Vol. 98, No. 5, Sep.-Oct., 2001, pp. 410-417.  KU ScholarWorks

Detwiler, R. and Darwin, D. "How to Write a Good Technical Paper," Concrete International, Vol. 23, No. 9, Sep. 2001, pp. 52-55.  KU ScholarWorks

Darwin, D., Balma, J., Locke, C.E., and Nguyen, T.V., "Accelerated Testing for Concrete Reinforcing Bar Corrosion Protection Systems," Durability 2000, P. J. M. Monteiro, K. P. Chong, J. Larsen-Basse, and K. Komvopoulos, eds., Proc. of Durability Workshop, Berkeley, CA, Elsevier Science Ltd., Oxford, 2001, pp. 97 - 108.

Browning, J.P., “Proportioning of Earthquake-Resistant RC Building Structures,” ASCE Journal of Structural Engineering, Vol. 127, No. 2, pp. 145-151, February, 2001.

Parsons, R.L., Johnson, C.J., and Cross, S.A. “Evaluation of Field Mixing and Construction Procedures for Lime Modified Subgrades,” Proceedings of the 80th Annual Meeting, Transportation Research Board. National Research Council. Washington, DC, January 7-11, 2001, CD-ROM. 24pp.

Darwin, D.,"Fracture of High-Strength Concrete: Implications for Structural Applications," Proceedings, Korea Concrete Institute, Vol. 12, No. 2, 2000, pp. 11-30.

Darwin, D., "Recent Technology for Concrete-Steel Composite Design," International Seminar on Recent Technology for Concrete-Steel Composite Systems, Seoul, Korea, 2000, pp. 1-45 (in English and Korean).

Medina, M.A., "On the Performance of Radiant Barriers in Combination with Different Attic Insulation Levels," Energy and Buildings, Vol. 33, No. 1, 2000, pp. 31-40. KU ScholarWorks

Medina, M.A., "Effects of Shingle Absorptivity, Radiant Barrier Emissivity, Attic Ventilation Flowrate, and Roof Slope on the Performance of Radiant Barriers," International Journal of Energy Research, Vol. 24, No. 8, 2000, pp. 665-678. KU ScholarWorks

Kirsch, F. W. and Medina, M.A., "Cost of Industrial Energy Efficiency: Its Effect Upon Their Implementation," The Journal of Energy and Development, Vol. 24, No. 1, 2000, pp. 83-108.KU ScholarWorks

Parsons, R.L. and Frost, J.D., "Interactive Analysis of Spatial Subsurface Data Using a GIS-based Tool", Journal of Computing in Civil Engineering, American Society of Civil Engineers, 2000, Vol. 14, No. 4, pp. 215-222.

Parsons, R.L. and McDonnell, J.J., "Use of Electrical Conductivity to Determine the Location of Subsurface Coal Mining Activity. Use of Geophysical Methods in Construction", ASCE Special Technical Publication 108, 2000, pp. 170-186.

Roddis, W. M. Kim and Zhang, L., "Equation Discovery in Databases from Engineering", Computing in Civil and Building Engineering, Proceedings of the Eighth International Conference (ICCCBE-VIII), American Society of Civil Engineers, Aug. 14-16, 2000, pp. 890-897.

Browning, J., R. Li, A. Lynn, and J. P. Moehle. "Performance Assessment for a Reinforced Concrete Frame Building," EERI Spectra, Vol. 16, No. 3, pp. 541-555, August 2000.

Zuo, J. and Darwin, D., "Splice Strength of Conventional and High Relative Rib Area Bars in Normal and High Strength Concrete," ACI Structural Journal, Vol. 97, No.4, July-Aug., 2000, pp. 630-641. KU ScholarWorks

Zuo, J. and Darwin, D., "Bond Slip of High Relative Rib Area Bars under Cyclic Loading," ACI Structural Journal, Vol. 97, No. 2, Mar. - Apr. 2000, pp. 331-334. KU ScholarWorks

Darwin, D., "Design of Composite Beams with Web Openings," Progress in Structural Engineering and Materials, Vol. 2, No. 2, Apr.-June, 2000, 157-163. Invited.

Browning, J. "Implications of a Proportioning Method for Earthquake-Resistant RC Frames Subjected to Strong Ground Motion," Proceedings 12th World Conference on Earthquake Engineering, Auckland, New Zealand, Jan. 1- Feb. 4, 2000.

Zhao, Y. and Roddis, W. M. Kim, "Fatigue Crack Investigation for the Arkansas River Bridge in Hutchinson, Kansas", TRB 79th Annual Meeting, Washington, D.C., Transportation Research Board, Jan. 9-13, 2000, CD ROM.

Young, C. B., Bradley, A.A., Krajewski, W. F., Kruger, A., and Morrissey, M. L., "Evaluating NEXRAD Multisensor Precipitation Estimates for Operational Hydrologic Forecasting", Journal of Hydrometeorology, Vol. 1, No. 3, 2000, pp. 241-254.

Holman-Dodds, J. K., Young, C. B., and Nelson, B. R., "Computational-Reach Length for Prismatic Channels", Journal of Hydraulic Engineering, Vol. 126, No. 6, 2000, pp. 467-469.

Young, C. B., A. A. Bradley, W. F. Krajewski, A. Kruger, and M. L. Morrissey, “Evaluating NEXRAD Multisensor Precipitation Estimates for Operational Hydrologic Forecasting,” Journal of Hydrometeorology 1(3): 241-254 (2000).

Holman-Dodds, J. K., C. B. Young, and B. R. Nelson, “Computational-Reach Length for Prismatic Channels,” Journal of Hydraulic Engineering 126(6): 467-469 (2000).

Azizinamini, A., Darwin, D., Eligehausen, R., Pavel, R., and Ghosh, S. K., “Proposed Modifications to ACI 318-95 Tension Development and Lap Splice for High-Strength Concrete,” ACI Structural Journal, Vol. 96, No. 6, Nov.-Dec., 1999, pp. 922-926.  KU ScholarWorks

Darwin, D., "Concrete in Compression," Concrete International, Vol. 21, No. 8, Aug., 1999, pp. 82-85. KU ScholarWorks

Idun, E., Darwin, D., "Bond of Epoxy-Coated Reinforcement: Coefficient of Friction and Rib Face Angle," ACI Structural Journal Vol. 96, No. 68, July-August 1999, pp. 609-616.  KU ScholarWorks

Browning, J. "Limiting Drift Response of Reinforced Concrete Building Structures Subjected to Strong Ground Motion," Proceedings of International Workshop on Seismic Isolation, Energy Dissipation, and Control of Structures, sponsored by NSF, Chinese Ministry of Construction, and Guangzhou Municipal People's Government, Guangzhou, China, May 6-8, 1999.

Medina, M.A., "A Quasi Steady State Heat Balance Model of Residential Walls," Mathematical and Computer Modelling, Vol. 30, 1999, pp. 103-112.

Medina, M.A.,"Validation and Simulations of a Quasi Steady State Heat Balance Model of Residential Walls,” Mathematical and Computer Modelling, Vol. 30, 1999, pp. 93-102.

Schmitt, T. R. and Darwin, D., "Effect of Material Properties on Cracking in Bridge Decks," Journal of Bridge Engineering, ASCE, Vol. 4, No. 1, Feb. 1999, pp. 8-13.

Benitez, M. A., Darwin, D., and Donahey, R. C., "Deflections of Composite Beams with Web Openings," Journal of Structural Engineering, ASCE, Vol. 124, No. 10, Oct. 1998, pp. 1139-1147.

Roddis, W. M. Kim, Hamid, H. A. and Guo, C., "K Factors for Unbraced Frames: Alignment Chart Accuracy for Practical Frame Variations," Engineering Journal, AISC, Third Qtr 1998, Vol. 35, No. 3 pp 81-93.

Darwin, D., Zuo, J., and Tholen, M.L., "Overview of Research to Improve the Development Characteristics of Reinforcing Bars," Bond and Development of Reinforcement: A Tribute to Peter Gergely, SP-180, R. Leon, Ed., American Concrete Institute, Farmington Hills, MI, 1998, pp. 299-318.

Darwin, D., Idun, E. K., Zuo, J., and Tholen, M. L., "Reliability-Based Strength Reduction Factor for Bond," ACI Structural Journal, Vol. 95, No. 4, July-Aug. 1998, pp. 434-443.  KU ScholarWorks

Roddis, W. M. Kim, "Torsion and Stability of Steel Bridge Girders During Construction," 43rd Annual Structural Engineering Conference, The University of Kansas Department of Civil Engineering and Division of Continuing Education, Lawrence, Kansas, Mar. 19, 1998, 4 pages.

Tholen, M. L. and Darwin, D., "Effect of Reinforcing Bar Deformation Pattern on Flexural Ductility," ACI Structural Journal, Vol. 95, No. 1, Jan.-Feb. 1998, pp. 37-42. KU ScholarWorks

Attoh-Okine, N. O. and Roddis, W. M. Kim, "Uncertainties of Asphalt Layer Thickness Determination in Flexible Pavements: Influence Diagram Approach," Civil Engineering and Environmental Systems, Gordon and Breach Publishers, Vol. 15, 1998, pp. 107-124.

Roddis, W. M. Kim, "Knowledge-Based Assistants in Collaborative Engineering," Artificial Intelligence in Structural Engineering: Lecture Notes in Artificial Intelligence 1454, Ian Smith (Ed.), Springer, 1998, pp. 320-334.

Young, C. B., McEnroe, B. M., and Quinn, R. J., 1998. "GIS-Based Processing of NEXRAD Rainfall Estimates", in Water Resources and the Urban Environment, Loucks, E. D., Ed., ASCE, Reston, Virginia, pp. 165-170.

Darwin, D. and Zavaregh, S.S., "Bond Strength of Grouted Reinforcing Bars," ACI Structural Journal Vol. 83, No. 94, July-August 1996, pp. 486-495. KU ScholarWorks

Darwin, D., Zuo, J., Tholen, M.L., and Idun, E.K., "Development Length Criteria for Conventional and High Relative Rib Area Reinforcing Bars," ACI Structural Journal Vol. 83, No. 32, May-June 1996, pp. 1-13.  KU ScholarWorks

Darwin, D., Tholen, M.L., Idun, E.K., and Zuo, J., "Splice Strength of High Relative Rib Area Reinforcing Bars," ACI Structural Journal 93-10, January-February 1996, pp. 95-107. KU ScholarWorks

Darwin, D. and Abou-Zeid, M. N, “Application of Automated Image Analysis to the Study of Cement Paste Microstructure,” Microstructure of Cement-Based Systems/Bonding and Interfaces in Cementitious Materials, S. Diamond et al., Eds., Materials Research Society Symposium Proceedings, Vol. 370, 1995, pp. 3-12. KU ScholarWorks

Darwin, D., “The Interfacial Transition Zone:  ‘Direct’ Evidence on Compressive Strength,” Microstructure of Cement-Based Systems/Bonding and Interfaces in Cementitious Materials, S. Diamond et al., Eds., Materials Research Society Symposium Proceedings, Vol. 370, 1995, pp. 419-427. KU ScholarWorks

Hadje-Ghaffari, H., Choi, O. C., and McCabe, S. L., "Bond of Epoxy-Coated Reinforcement: Cover, Casting Position, Slump, and Consolidation," ACI Structural Journal Vol. 83, No. 7, January-February 1994, pp. 59-68. KU ScholarWorks

Darwin, D. and Graham, E. K. “Effect of Deformation Height and Spacing on Bond Strength of Reinforcing Bars,” ACI Structural Journal, Vol. 90, No. 6, Nov.-Dec. 1993, pp. 646-657.   KU ScholarWorks

Hester, C. J., Salamizavaregh, S., Darwin, D., and McCabe, S. L., “Bond of Epoxy-Coated Reinforcement:  Splices,” ACI Structural Journal, Vol. 90, No. 1, Jan.-Feb. 1993, pp. 89-102. KU ScholarWorks

Zhao, H. and Darwin, D., “Quantitative Backscattered Electron Analysis of Cement Paste,” Cement and Concrete Research, Vol. 22, No. 4, July 1992, pp. 695-706. KU ScholarWorks

Darwin, D., McCabe, S. L., Idun, E. K., and Schoenekase, S. P., "Development Length Criteria: Bars Not Confined by Transverse Reinforcement," ACI Structural Journal Vol. 83, No. 94, November-December 1992, pp. 709-720. KU ScholarWorks

Choi, O., Hadje-Ghaffari, H., Darwin, D., and McCabe, S. L., "Bond of of Epoxy-Coated Reinforcement: Bar Parameters," ACI Materials Journal Vol. 88, No. 26, March-April 1991, pp. 207-217. KU ScholarWorks

Harsh, S., Shen, Z., and Darwin, D., "Strain-Rate Sensitive Behavior of Cement Paste and Mortar in Compression," ACI Materials Journal Vol. 87, No. 55, September-October 1990, pp. 508-516.  KU ScholarWorks

Rodrigues, C. P. and Darwin, D., “Shear Strength of Lightly Reinforced T-Beams in Negative Bending,” ACI Structural Journal, Vol. 84, No. 1, January-February 1987, pp. 77-85.KU ScholarWorks

Altowaiji, W.A.K., Darwin, D., and Donahey, R.C., "Bond of Reinforcement to Revibrated Concrete," ACI Journal Vol. 83, No. 94, November-December 1986, pp. 1035-1042. KU ScholarWorks

Harsh, S. and Darwin, D., “Traffic Induced Vibrations and Bridge Deck Repairs,” Concrete International, Vol. 8, No. 5, May 1986, pp. 36-42.  KU ScholarWorks

Brettmann, B.B., Darwin, D., Donahey, R.C., "Bond of Reinforcement to Superplasticized Concrete," ACI Journal Vol. 83, No. 12, January-February 1986, pp. 98-107.  KU ScholarWorks

Donahey, R.C. and Darwin, D., "Bond of Top-Cast Bars in Bridge Decks" ACI Journal Vol. 82, No. 5, January-February 1985, pp. 57-66. KU ScholarWorks

Mockry, E.F. and Darwin, D., “Slender Column Interaction Diagrams,” Concrete International, Vol. 4, No. 6, June 1982, pp. 44-50. KU ScholarWorks

Maher, A., and Darwin, D., "Mortar Constituent of Concrete in Compression," Journal of the American Concrete Institute, Vol. 79, No. 2, March-April 1982, pp. 100-109. KU ScholarWorks

Palaskas, M. N., Attiogbe, E. K. and Darwin, D., “Shear Strength of Lightly Reinforced T-Beams,” Journal of the American Concrete Institute, Vol. 78, No. 6, November-December 1981, pp. 447-455.  KU ScholarWorks

Bashur, F., and Darwin, D., "Nonlinear Model for Reinforced Concrete Slabs," Journal of the Structural Division, ASCE, January 1978, pp. 157-170. KU ScholarWorks